How to change the temples/frame arms of your Ray-Bans?

How to change the temples/arms of your Ray-Bans?

Over time the temples of our glasses deteriorate and even break in half. At, we show you how to change the temples of your Ray-Bans.

We’ll show you step by step:

  1. In order to change your temples or frame arms a precision screwdriver and if possible a pair of tweezers is required. Picking up tiny screws using your hands can be very cumbersome.
  2. There are generally two screws in metal frames. One for the lenses and another for the temples. The frame arm screw must be unscrewed. In acetate or plastic frames there is generally only one screw.
  3. Once our screws have been removed, it’s best to them leave in a safe place so that they do not roll away and then adjust the new temple. In order to install it, and so that you can insert the screw you will have to place the arm frame at a 45º angle facing toward you and using the pliers place the screw in the hole.
  4. Tighten our screw.
  5. And voilà!Our temple is changed!

It’s quite simple, but there is always something that may vary or have a rather unusual mechanism. As you already know, should you have any questions, please do not hesitate to us and we will be very happy to help.

22 thoughts on “How to change the temples/frame arms of your Ray-Bans?

  1. Hi, I ordered two new temples for the Hexagonal ray ban glasses and two temples arrived but they were for the same side.

    1. Hello!
      Could you contact our customer service?

  2. do you have replacements for Ray Ban’s RB 3107?

    1. replacement for temples/frame arms


  3. thank you so much for sharing this article!!
    for more click here :

  4. I need longer frame arms for my Ray Bans, but they do not provide them. Are there compatible parts?

  5. If I buy replacement arms, do they come with the screws?
    Thank you

  6. Thank you for sharing this valuable information with us.

  7. Will 145mm RB RX5154 temples fit on a standard (49 21) frame?

    1. Hello

      Thank you very much for contacting us.

      Yes, it will fit the same, the only thing that will change is the length.


  8. I’ve tried to undo the screws myself and it is literally not possible! Do you have any tips?!

    1. Hello

      Thank you for contacting us!

      Could you send us pictures of the problem to our email ([email protected])?

      Thank you!

  9. Does anyone know where I can get a replacement right temple arm for Ray Ban sunglasses RB 3052 W3180 sunglasses Any helpful information will be highly appreciated.
    Thank You. Mr. G.

    1. Hello

      Thank you very much for contacting us! Sorry, we can’t check compatibility because we don’t have your glasses model

      Thanks a lot

  10. How do I replace my temples for RB7062 2077.

    1. Hi

      Thank you very much for contacting us. This model is similar:

      Thank you very much

  11. where can I buy replacement of Ray-ban aviator temple?

    1. Hi Michael,

      Thank you very much for contacting us. You can find the Aviator ams here:

      Thank you very much,
      Kind Regards,

  12. I do accept as true with all the ideas you have presented to your post.
    They’re very convincing and will definitely work. Nonetheless,
    the posts are too brief for newbies. May you please extend them
    a little from next time? Thank you for the post.

  13. RB 8412 2892 54 17. 145

  14. How do you install replacement temples for RAY-BAN RB 7062 5575 ? The temples are fine but the hinge will not close.

Leave a Reply

Your email address will not be published. Required fields are marked *